Back to Basics SE2000 Owner's Manual download pdf (Page 287)

100

101

6-20

Engine Air Cleaner/Filter

To check or replace the air cleaner/filter:

1. Loosen the two clips on the top of the air cleaner

housing and lift the filter cover tabs out of

the housing.

2. Push the filter cover housing toward the engine,

compressing the duct convolutes.

3. Pull out the filter. Install the new air filter and make

sure the filter cover tabs position through the slots in

the housing.

4. A notch on the sides of the filter cover will indicate

the correct engagement. Reinstall the two clips on

the top of the housing when you are finished.

Refer to the Maintenance Schedule to determine when to

replace the air filter.

See “Scheduled Maintenance Services” in the Index.

CAUTION:

Operating the engine with the air cleaner/filter

off can cause you or others to be burned. The air

cleaner not only cleans the air, it stops flame if

the engine backfires. If it isn’t there, and the

engine backfires, you could be burned. Don’t

drive with it off, and be careful working on the

engine with the air cleaner/filter off.

1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 375 376

Comments to this Manuals

No comments

Back to Basics SE2000 Owner's Manual Page 287

Comments to this Manuals